11
4. Main Menu
ENGLISH
Language
Select the desired language for the menu here (e.g. English).
Time setup
Sync Time = Enables or disables automatic time synchronization.
Server
= Select the server over which the time is synchronized.
Time zone = Choose your time zone (e.g. +02:00 for Germany)
Time setup = This item is only active if you have deactivated the „Sync time“.
You can then enter the time manually.
Wired network
If DHCP is activated, the monitor will automatically be assigned an IP address in
the network. If DHCP is disabled, you can assign the monitor a fixed IP address
manually. We recommend to enable DHCP.
Match Code
In this menu you can see all the cameras that are successfully connected to the
monitor. To add a camera, proceed as follows:
4.2 System setup
Note:
If you want to remove a camera from the list, navigate with the
q
key
to the respective X symbol and confirm with OK.
1. Connect the camera and the monitor with a LAN cable.
2. Use the
q
key to navigate to the „Add camera“ button and confirm with OK.
3. The search takes only a few seconds. Then the new camera will be displayed
in the list.
4.
You can now remove the LAN cable. From now on, the camera connects to
the monitor via WLAN.
Camera
Network cable
Netzwork adapter
Monitor
