Chapter 2
2.1 Setting Up
1.
Place the Portable Digital Presenter on a flat surface. Raise or Adjust the Goose Neck and
turn the CCD camera so that the camera lens is pointing to the object to be displayed.
2.
Plug DC jack of the AC Power Adapter into the port labeled DC 12V on the rear panel of
the Digital Presenter.
3.
Plug the power adapter into a convenient AC outlet.
4.
Follow the instructions in section 2.3 to connect other cables.
5.
Place the object in front of the digital presenter. Push the "SOURCE" button on the top of the
base to select the Presenter VGA output or input. Rotate the Focusing Knob to get a sharp
image. Adjust the height of the Goose Neck to vary the size of the displayed object.
6.
To select Video Output, press the "SIGNAL" button on the remote control.
6
Camera
Head
Base
Goose
Neck
Control
Panel
LED Lamp
