MegaPoints Controllers
System2 Panel Controller User Reference
Revision 1
megapointscontrollers.co.uk
Page 5
First use
See the image below for connection details.
Connect each board to a 12 Volt regulated power supply, minimum 500 mA per Panel
Controller.
Connect the network cable to the two screw terminals. Observe the ‘H’ and ‘L’ terminals.
Ensure all the ‘H’ and ‘L’ wires connect to each other respectively.
If your board was part of a starter kit it will be configured as EasyConfig board 1.
Connect an LED cable pair to output #1 ensuring the black lead is toward the outer edge.
Connect a button lead to input #1 ensuring the black lead is toward the outer edge.