MegaPoints Controllers
System2 Panel Controller User Reference
Revision 1
megapointscontrollers.co.uk
Page 28
Reload Page
This option reloads the web page and resets the Status Log area. Useful for clearing garbage from
the log and confirming you are connected to the board.
Documentation
Clicking the Documentation link will open a new window in your browser and take you to the
product page for the board you clicked from. On the product page you’ll find links to the relevant
documentation and video guides for this product along with recommended accessories.
This option requires an Internet connection.
Network Monitor
WARNING! This section may send you to sleep and is not required reading.
The Network Monitor option takes you to a CAN bus network monitor.
The Network Monitor should be considered experimental, though we relied on it heavily during
development.
The Network Monitor will provide a real time display of the traffic on your CAN bus.
The V-Port the packet is intended for is decoded n the right column (1).
The headers (2) contain the following details:
Header
Description
Seq
Packet sequence as observed by the board the
Network Monitor is running on.
Min
Number of minutes since starting. Rolls over
at 99.
SS
Seconds within the previous minute.
mSS
Millisecond within the previous second.
uSS
Microsecond within the previous millisecond.
CanId
The CAN ID that created the packet.
