2
Connections
Overview
The OMNIS system consists of; the OMNIS processor, the system it is monitoring and the network connections in between.
Connections
Power
- A/C power is supplied to the OMNIS on a C14 style IEC connector. There is no power switch. When power is
applied, the system will begin to boot. After about 15 seconds the front screen will be lit. When the boot logo disappears,
the OMNIS is ready for use.
Monitoring Ports
- Connect the control ports of a HELIOS display processor to the monitoring ports to have the OMNIS
system automatically discover the system topology. Remember to assign all devices to the same LAN manually or use
DHCP if available.
User Interface
- The OMNIS system can be used with a wide variety of LED display products. It is necessary to configure
the system to the products in use. Configuration of the OMNIS System is accomplished with a web application. The web
app runs on any remote host capable of running a modern web browser such as Chrome or Safari. In order to
communicate with the OMNIS System, the web app host must be configured to be on the same LAN as the OMNIS.
OMNIS AV Monitoring System - USER GUIDE
6
