[Motion] when the motion is detected, an event occurs.
[Timer] the events occurs periodically. (Unit: second)
- Action Types
[Preset Move]
When the PTZ camera is connected to, the command "Preset Move" is sent to the PTZ camera.
[Digital Output]
This means "relay output". The signal "Digital Output" is sent by the time that is defined. The output status
can be adjusted as below.
1) Close to open: sends the signal "Digital Output" to "open" state.
2) Open to close: sends the signal "Digital Output" to "close" state.
[TDN]
This means "True Day&Night". Available only to some IP camera models.
The color can be adjusted as below.
1) BW: sets the color to "black and white".
2) Color: sets the color to "color".
Event Type
[Add Event (+) button] click this button to add an event entry.
1) Event Type: select one out of "Digital Input / Motion / Timer"
1-1) Digital Input > Sensor: select a sensor to use.
Digital Input > Status: select one out of "close to open / open to close"
1-2) Motion > ROIs: Motion ROI (refer to the item "Motion Detect")
1-3) Motion > Status: select one out of "on / off"
1-4) Timer > Interval: select one out of "1 ~ 86400" (unit: second)
2) Action Type: select one out of "Preset Move / Digital Output / TDN"
2-1) Preset Move > No: select one out of "1~255". Set the preset on the item "Video Source".
2-2) Digital Output > Relay/No: select considering the connection "Digital Output".
2-3) Digital Output > Status: select one out of "close to open / open to close"
2-4) Digital Output > dwtime: duration (1~60 seconds)
2-5) TDN > Status: select one out of "BW / color"
Create an event button: Click to create the setting event.
Cancel button: Click to cancel the setting event.
[Delete event (-) button] click this button to remove the event entry.
[OK button] click this button to apply the changed setting values.
