36
ERROR INDICATION
Contact professional service if you are not able to fix the problem with the below error indi-
cation list.
ERR
.
1:
No rotating signal.
a. Wrong sensor location.
b. Motor does not rotate.
c. Rotation obstructed.
d. Drive belt damaged.
a. Check the sensor.
b. Check the motor.
c. Remove the blocking object.
d. Tighten or replace the belt.
ERR
.
2:
Low rotating speed
a. There is an unexpected blackout in the rota-
tion unit.
b. Drive belt is loose.
a. Check the blackout reason and
fix it.
d. Tighten or replace the belt.
ERR
.
3:
Faulty result
a. Faulty self-calibration
b. Unbalance value is too big.
c. Faulty circuit board
a. Repeat the self-calibration
procedure.
b. Check that the wheel has been
installed correctly to the shaft.
c. Replace the circuit board.
ERR
.
4:
Error with power supply or position sensor
ERR
.
5:
Limit switch error
ERR
.
6:
Memory damaged or signal lost.
a. Faulty self-calibration
a. Repeat the self-calibration
procedure.
ERR
.
7:
Calibration error, sensor cable or pressure
sensor damaged, bad connection
a. Reference weight has not been used in the
second calibration step.
b. Faulty sensor cable
a. Add reference weight during the
second calibration step.
b. Reset the connection.
