Note: Remove all packaging, including straps, before using the BakerBox
TM
.
How to use your BakerBox
TM
on a 57cm charcoal kettle.
1. Remove the charcoal kettle main lid. You can hang or store the main lid, as it will not be
used while using the BakerBox
TM
. Remove the cooking grid.
2. Place charcoal briquettes or lump charcoal as needed (approx. 1.5kg), in order to get a
good even coverage of coals in your charcoal tray. Make sure to follow the instructions
that come with your charcoal for lighting instructions.
3. Ensure that there are sufficient coals to enable cooking temperature to be achieved and
maintained for cooking the pizza.
4. IMPORTANT: when adjusting/opening the hood, be careful not to dis-lodge from the
BBQ
5. After your coals are red hot, spread the coals for optimum heat distribution. Make sure
to follow the instructions that come with your charcoal for safety instructions on working
with hot charcoal. We recommend to place LESS coals in the center in order to achieve
proper heat distribution for the desired BakerBox
TM
cooking zone. Refer to Figure 9.
6. Re-install cooking grids. Place the BakerBox
TM
on the cooking grid to start pre-heating.
7. Once the temperature reaches the proper BakerBox
TM
cooking zone, you may now
place your uncooked pizza or alternate food into the oven for baking.
8. Rotate the food as necessary to for even cooking.
Charcoal Kettle Operating Instructions
Warning: Please read the following instructions carefully before attempt to
assemble, operate or install the product. The BakerBox becomes extremely hot and
can cause burning. Failure to comply with these instructions may result in serious
bodily injury. Always wear heat resistant oven mitts or gloves for outdoor cooking
when handling the BakerBox
TM
.
11
Fig. 10
Fig. 9
