background image

The manufacturer warrants to the original consumer-purchaser only that this product (Turano Cast Iron Fireplace) shall be free from defects in 

workmanship and materials after correct assembly and under normal and reasonable home use for the periods indicated below beginning on the 

date of purchase.  The manufacturer reserves the right to require photographic evidence of damage, or that defective parts be returned, postage 

and/or freight pre-paid by the consumer, for review and examination. Megamaster obligation is limited to repair, replacement, or depreciated value, 

at the option of Megamaster.

Cast iron body: 5 year LIMITED warranty (*Does not cover dropping, chipping, cracking, surface corrosion, scratches or rust.)

Removable parts: 1 year LIMITED warranty (*Does not cover dropping, chipping, cracking, surface corrosion, scratches or rust.)

The following is not covered by this guarantee or warranty: 

1.

Glass Panel 

2.

Rope and gasket seals

3.

Paint discolouration 

Upon consumer supplying proof of purchase as provided herein, Manufacturer will repair or replace the parts which are proven defective during the 

applicable warranty period. Parts required to complete such repair or replacement shall be free of charge to you except for shipping costs, as long 

as the purchaser is within the warranty period from the original date of purchase. reasonable proof of your date of purchase. The original 

consumer-purchaser will be responsible for all shipping charges of parts replaced under the terms of this limited warranty.  This limited warranty is 

applicable in South Africa only, is only available to the original owner of the product and is not transferable. Manufacturer requires, you should 

retain your sales receipt and/or invoice. If the unit was received as a gift, please ask the gift-giver to send in the receipt on your behalf, to the 

below address. Defective or missing parts subject to this limited warranty will not be replaced without registration or proof of purchase. Missing 

parts needs to be reported within 7 days of purchase. This limited warranty applies to the functionality of the product ONLY and does not cover 

cosmetic issues such as scratches, dents, corrosions or discolouring by heat, abrasive and chemical cleaners or any tools used in the assembly or 

installation of the appliance, surface rust, or the discoloration.  Surface rust, corrosion, or powder paint chipping on metal parts that does not affect 

the structural integrity of the product is not considered a defect in workmanship or material and is not covered by this warranty.  This limited 

warranty will not reimburse you for the cost of any inconvenience, food, personal injury or property damage. If an original replacement part is not 

available, a comparable replacement part will be sent. You will be responsible for all shipping charges of parts replaced under the terms of this 

limited warranty. 

MANUFACTURER WILL NOT PAY FOR: 

•Service calls to your home. 

•Repairs when your product is used for other than normal, single

-family household or residential use. 

•Damage resulting from accident, alteration, misuse, lack of maintenance/cleaning, abuse, fire, flood, acts of God, improper 

installation, and 

installation not in accordance with electrical or plumbing codes or misuse of product.

•Replacement parts or repair labour costs for units operated outside South Africa. 

•Pickup and delivery of your product. 
•Postage fees or photo processing fees for photos sent in as documentation.

•Repairs to parts or systems resulting from unauthorized modifications made to the product. 

•The removal and/or reinstallation of your product. 

•Shipping cost, standard or expedited, for warranty/non warranty and replacement parts. 

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES 

Repair or replacement of defective parts is your exclusive remedy under the terms of this limited warranty. Manufacturer will not be responsible for 

any consequential or incidental damages arising from the breach of either this limited warranty or any applicable implied warranty, or for failure or 

damage resulting from acts of God, improper care and maintenance, grease fire, accident, alteration, replacement of parts by anyone other than 

manufacturer, misuse, transportation, commercial use, abuse, hostile environments (inclement weather, acts of nature, animal tampering), 

improper installation or installation not in accordance with local codes or printed manufacturer instructions. 

THIS LIMITED WARRANTY IS THE SOLE EXPRESS WARRANTY GIVEN BY THE MANUFACTURER. NO PRODUCT PERFORMANCE SPECIFICATION OR 

DESCRIPTION WHEREVER APPEARING IS WARRANTED BY MANUFACTURER EXCEPT TO THE EXTENT SET FORTH IN THIS LIMITED WARRANTY. 

ANY IMPLIED WARRANTY PROTECTION ARISING UNDER THE LAWS OF ANY STATE, INCLUDING IMPLIED WARRANTY OF MERCHANTABILITY OR 

FITNESS FOR A PARTICULAR PURPOSE OR USE, IS HEREBY LIMITED IN DURATION TO THE DURATION OF THIS LIMITED WARRANTY. 

Neither dealers nor the retail establishment selling this product has any authority to make any additional warranties or to promise remedies in 

addition to or inconsistent with those stated above. Manufacturer's maximum liability, in any event, shall not exceed the documented purchase 

price of the product paid by the original consumer. This warranty only applies to units purchased from an authorized retailer and or re-seller. 

If you wish to obtain performance of any obligation under this limited warranty, you should write to:

Megamaster Customer Service 

PO Box 15, Woodlands,0072, South Africa

All consumer returns, parts orders, general questions, and troubleshooting

assistance can be acquired by calling 

010 001 6342 

or sending an e-mail to 

[email protected] 

WARRANTY 

20

Summary of Contents for ANDIRON





















Reviews: