Display Menu
6
UP
DOWN
SET
MODE
The control board on the fixture base is your interface to access and
control all the functions on the unit. Its LED display gives you a code
view of the options and functions. The following will explain each func-
tion and its options.
1: DMX
2: Slave
3: Auto
4: Program
t
04ch
001
V:2.1.1
42ºC
Channel Mode
Software Version
Lock Indicator
DMX Indicator
DMX Start Channel
Fixture Temp
Address:
To Change the DMX Start Channel Press
SET
use the
UP
and
DOWN
buttons
to select desired DMX Start Channel
Channel Mode:
To Select the fixtures operating channel mode press
DOWN
so the 2)
Channel is highlighted then press
SET.
Use the
UP
and
Down
buttons to select the fix-
tures operating Channel mode from the options below.
Mode 4Ch=R,G,B,W
Mode 6Ch=Dimmer,R,G,B,W, Strobe
Mode 9Ch=Dimmer,R,G,B,W, Strobe, Macro, Macro Speed, Dimming Curve
DMX
1) Address: 001
2) Channel: 04
1: DMX
2: Slave
3: Auto
4: Program
This function allows the fixture to copy the master unit. Fixture must be addressed to
DMX Start Channel 001.
1: DMX
2: Slave
3: Auto
4: Program
Summary of Contents for Outshine Strip Q80
Page 2: ......
