5
Main Power Connection
Caution!
1.
Do not connect fixture to a dimmer system.
2.
This unit has Auto switching power supply. It will respond to 110V or 240V automatically
3.
This unit must be earthed. (electronically grounded)
4.
Replace fuse only with the specified type and rating.
5.
Power Link 3 units at 110V and 6 units at 220V
The occupation of the connection
-
cable is as follows:
DMX
-
512 Connection
This fixture is equipped with an electronic power supply that will let the unit operate from 100V to 240V from 50Hz to 60Hz
Caution!
At the last fixture the DMX signal needs to be terminated with a terminator. Solder a 120 Ohm re-
sistor between the (
-
) and the (+) signal into a 5 pin XLR plug and plug it in to the last fixture on the
signal run. Pre
-
manufactured terminator plugs are available for purchase from your Mega
-
Lite
dealer (P
-
DMXT).
Cable (USA)
Cable (EU)
Pin
110V
Black
Brown
White
Green
Light Blue
Yellow/Green
Live
Neutral
Ground
L
N
220V
L
L
DMX—input
DMX—output
1. Shield
2. Signal (
-
)
3. Signal (+)
5
3
4
2
1
1
2
3
4
5
4. N/A
5. N/A
The fixture is equipped with 5 pin XLR cable mounted sockets for DMX input and output. The sockets are wired in paral-
lel. Only use a shielded twisted pair cable designed for RS
-
485 and 5 pin XLR plugs and connectors in order to connect
the controller with the fixture or the fixture with another.
