PROGRAMMING
A. PROGRAMMING TRANSMITTER:
Enter:
1. Turn the Ignition switch ‘OFF/ON’ 3 TIMES and stay in ON position. Within 15 seconds.
2. Push the Valet switch 3 times and hold it until a long chirp is hearing then release the valet switch. You
are
now in the Transmitter programming mode.
Program:
1. Press button on one of the transmitter until the siren respond with a confirming chirp the first transmitter is
now programmed.
2. Press button on the second transmitter until the siren respond with a confirming chirp, the second
transmitter is now programmed.
3. Apply the same procedure to program 3rd and 4th
.
Exit:
Turn Ignition to 'OFF' position, or leave it for 15 seconds. A 3 long chirps to confirm exit.
Note: If more than 4 transmitters programmed, the system only kept the last 4 transmitters.
B. ALARM FEATURES PROGRAMMING:
ALARM FEATURE “
I
” PRORAMMING:
1. Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in OFF position.
2. Push the Valet switch
2
times and hold it until
one
chirp and a long chirp is hearing then release the
valet switch. You are now in the Alarm feature
‘I’
programming mode.
3. Press and release the transmitter button ‘A’ corresponding to the feature ‘A’ you want to program.
a.
The siren chirps and LED pause will indicate the latest setting.
b.
The factory default setting is always [1] LED flash, [1] chirp.
4 Depress the transmitter button ‘A’ to change the feature. Simple re-depressing the transmitter button ‘A’
again until the module advances to your desired setting.
a.
In this case, Press button ‘A’ again, the module would advance to [2] LED flash, [2] chirp. Press button
‘A’
again, the module would advance to [3] LED flash, [3] chirps etc.
5. Depress the transmitter button ‘B’ corresponding to the feature ‘B’ you wants to program.
Press
Transmitter
Button
One Chirp /
LED one pulse
Factory Default Setting
Two Chirps /
LED two pulse
1. Button I
Chirps on
Chirps off
2. Button II
Automatic Rearm On
Automatic Rearm Off
3. Button I + II With Door Ajar error chirp.
Bypass Door Ajar error chirp
Exit
:
Turn Ignition to 'ON' position, or leave it for 15 seconds. A 3 long chirps to confirm exit.
ALARM FEATURE “
II
” PRORAMMING:
1 Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in OFF position.
2 Push the Valet switch
4
times and hold it until
two
chirps and a long chirp is hearing then release the
valet switch. You are now in the Alarm feature
‘II’
programming mode.
3 Press and release the transmitter button ‘A’ corresponding to the feature ‘A’ you want to program.
Press
Transmitter
Button
One Chirp /
LED one pulse
Factory Default Setting
Two Chirps /
LED two pulse
Three Chirps /
LED three pulse
1
Button I
0.9-second Door lock
pulses.
3.0-second Door lock
pulse.
Double pulse unlock
2 Button II
Active arming
Passive arming without
passive door locking
Passive arming with
passive door locking.
3
Button I + II
Ignition controlled door
locks & unlocks
Without ignition controlled
door locks & unlocks
Exit
:
Turn Ignition to 'ON' position, or leave it for 15 seconds. A 3 long chirps to confirm exit.
ALARM FEATURE “
III
” PRORAMMING:
1 Turn the Ignition switch ‘ON/OFF’ 3 TIMES and stay in OFF position.
2 Push the Valet switch 6 times and hold it until three chirps and a long chirp is hearing then release the
valet switch. You are now in the Alarm feature ‘III’ programming mode.
5
