6-Quart Digital Pressure Cooker | Model MCPR100A | 11
1.
Remove packaging materials such as cardboard, plastics or Styrofoam and discard
appropriately.
2.
Clean all the parts by wiping with a soft damp cloth or sponge and dry thoroughly.
3.
Thoroughly clean the cooking pot in the dishwasher or with warm soapy water. Rinse,
towel or air-dry, and place in the pressure cooker.
RUBBER SEALING RING ASSEMBLY
PRESSURE LIMITING VALVE
BEFORE FIRST USE
1. Lid Handle
2. Lid
3. Pressure Limiting Valve
4. Float Valve (external view)
5. Float Calve (internal view)
6. Stainless Steel Inner Pot
7. Outer Pot
8. Side Handles
9. Upper Ring
10. Control Panel
11. Power Cable
12. Main Outer Body
13. Heating Plate
14. Bottom Ring
15. Float Valve Seal Ring
16. Filter
17. Rubber Sealing Ring
18. Y-Shaped Metal Ring
19. Sensor
Always ensure the rubber sealing ring is securely fitted onto the Y-shaped metal ring. Make sure
the crease in the rubber sealing ring meets with the outside of the Y-ring all the way around.
Then place the Y-ring and rubber seal ring back into the lid making sure the hole in the center
of the Y-ring’s cross-section is lined up with the metal pin in the center of the lid. Press down
firmly until the Y-ring is secured onto the lid (figures 1-2).
Adjust the pressure limiting valve (3) to the airtight position by moving it side to side until it seals
properly. To release pressure, move the pressure limiting valve side to side until the pressure can
escape from the unit.
Fig 1.
Fig 2.
