megascan M1
User Manual Rev. 1.0
Updated on 28th
August, 2009
Technical Contacts and Enquiry: [email protected]
Website: www.scanmega.com
(This user manual / product specification is subjected to be changed without prior notice) P.
12
2.5
Professional Installation Instructions
Safety and Regulatory Compliance Information
This document contains important safety and regulatory compliance information for the
following products:
Please read this document before installing and using your product and see the following
sections for more information:
• Safety Information
• Federal Communications Commission (FCC) Compliance
– Modifications
– Warnings
• Information for Professional Installers
• Regulatory Compliance Certifications Summary
Safety Information
All products are intended to be installed, used, and maintained by experienced
telecommunications personnel only.
When using this device, basic safety precautions should always be followed to reduce the
risk of fire, electrical shock, and injury to persons, including the following:
• Operate and install these products as described in this manual. Equipment must be
installed and used in strict accordance with the manufacturer's instructions as described in
the user documentation provided.
• Installation of these products in the end use must conform to local regulations and
codes.
• Products are to be used with and powered by only the power injector provided.
• A 13-amp circuit breaker is required at the power source.
• Do not connect or disconnect the power cable to the equipment when the power injector
is plugged into an AC power outlet.
• Servicing of these products should be performed only by trained personnel. Do not
disassemble. By opening or removing any covers, you may expose yourself to hazardous
energy parts. Incorrect reassembly of these products can cause a malfunction and/or
electric shock when the units are subsequently used. No user serviceable parts; all repairs
and service must be handled by a qualified service center.
• Do not insert any objects of any shape or size inside these products while powered on.
Object may contact hazardous energy parts that could result in a risk of fire or personal
injury.
• Do not remove or alter the Marking label provided on these products.
• To avoid the risk of electric shock from lightning, do not use these products during an
electrical storm.
• When using these products with an external antenna, see the installation documentation
provided with the antenna system.