Mega Lite NOVA-LITE Q200, User Manual, Page: 10 / 11

10
Installation M aintenance: The operator has to make sure that the unit is operating safely and has the installa-
tions and electronics checked by an expert every year.
The following points have to be considered during the inspection:
1) All screws used for installing the device or part of the device have to be tightly connected and must not be corroded.
2) There must not be any deformations on the housing, fixation and installation spots (ceiling, suspension, trussing).
3) The electronic power supply cables must not show any damages, material fatigue (e.g. porous cables) or sediments.
Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any
safety problems have to be removed.
Note: There is no serviceable parts inside the device except for the LED’s. Maintenance and service operations are
to be carried out by authorized dealers.
Replacing the fuse: Only replace the fuse with the same type and rating. (Line Fuse is located inside the fixture)
Replacing the power cable: If the power cable of this device becomes damaged, it has to be replaced by author-
ized dealers or trained professional only.
Should you have further questions , please contact your dealer.
Parts List
4450-DRI LED Driver card
4450-PS Power Supply
4450-DIS Display
4450-KN Knob Set
4450-LED Replacement LED
4450-FP Frontal Plastic
4450-KNS Small Knob Set
Cleaning and Maintenance
4450-DIF60 60 Degree Diffusion Lens
4450-BD Barn Door
4450-CT Ceiling Tile Holders (set)
4450-DIF15 15 Degree Lens
4450-DIF30 30Degree Lens
4450-BD Barn Door
4450-HPM Hanging Point Metric (10mm)
Accessories
4450-DT Decorative Trim (Custom Color)
4450-HPS Hanging Point Standard ( 1/2 inch)
Pendant Mount: When using pendant and treaded mount
consider the following
1) Remove the yoke as it will no longer be used.
2) Using a standard 1/2 bolt you can hang the fixture by thread-
ing directly into the top. ( a metric 10mm version is also
available part #4450-HPM)
3) Using a steel cable you can hang the fixture by running a
steel cable throw the side hole
4) It is very important that you secure the fixture with a second-
ary safety .