5
Main Power Connection
Caution!
1.
Do not connect fixture to a dimmer system.
2.
This unit must be earthed. (electronically grounded)
3.
Replace fuse only with the specified type and rating.
The occupation of the connection
-
cable is as follows:
Cable (USA)
Cable (EU)
Pin
International
Black
Brown
White
Yellow / Green
Blue
Yellow/Green
Live
Neutral
Pin
L
N
1
2
3
1
3
2
DMX
-
512 Connection
DMX
—
input
DMX
—
output
1. Shield
2. Signal (
-
)
3. Signal (+)
Caution!
On the last fixture the DMX signal needs to be terminated with a terminator. Solder a 120
Ohm resistor between the (
-
) and the (+) signal into a 3 pin XLR plug and plug it in to the
last fixture on the signal run. Pre
-
manufactured terminator plugs are available for
purchase from your Mega
-
Lite dealer (HOS
-
DMXT).
AC 100V 50Hz
-
60Hz
The fixture is equipped with 3 pin XLR Sockets for DMX input and output. The sockets are wired in parallel. Only use a shielde
d
twisted pair cable designed for RS
-
485 and 3 pin XLR plugs and connectors in order to connect the controller with the fixture or
the fixture with another.
