Mega Lite Halo 5R, User Manual

Page: 13 / 14

Cleaning and maintenance
Installation Maintenance: The operator has to make sure that the unit is operating safely and has the installations and electron-
ics checked by an expert every 2 years.
The following points have to be considered during the inspection:
1) All screws used for installing the device or part of the device have to be tightly connected and must not be corroded.
2) There must not be any deformations on the housing, fixation and installation spots (ceiling, suspension, trussing).
3) Mechanically moved parts like axles and other must not show any traces of wearing and must not rotate with unbalances.
4) The electronic power supply cables must not show any damages, material fatigue (e.g. porous cables) or sediments. Further
instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety problems
have to be removed.
Disconnect from mains before starting maintenance operation!
Caution Danger to life!
We recommend a frequent cleaning of the device. Please use a moist, lint free cloth. Never use alcohol or solvents!
1) The objective lens will require periodic cleaning on usage and environment. Environment with foggers will require more peri-
odic cleaning as fog fluid tends to build up residues, reducing the light output.
2) The cooling-fans should be cleaned monthly. DO NOT blow high pressure air into fans as incorrect rotation can damage the
fans operation.
3) The gobos, dichroic color filters and internal lenses may be cleaned with soft brush using soapy water.
4) The interior of the fixture should be cleaned using a vacuum.
5) We recommend proper lubrication of the motor wheel. The quantity of the oil must not be excessive in order to avoid oil run
outs when motor wheel rotates
Note: There is no serviceable parts inside the device except for the fuse. Maintenance and service operations are to be carried
out by authorized dealers.
Replacing the fuse: Only replace the fuse with the same type and rating.
Replacing the power cable: If the power cable of this device becomes damaged, it has to be replaced by authorized dealers only
In order to avoid hazards.
Should you have further questions , please contact your dealer.
13
Parts List
Item #
Description
1200-PSL Lamp Power Supply
1200-PS Unit Power Supply
1200-IG Lamp Ignitor
1200-PCBL LED PCB
1200-PCBM Main PCB
1200-PCBD Driver PCB
1200-PCBDIS Display PCB
1200-PCBDMX DMX PCB
1200-FAN80 80mm fan 12V Brushless
1200-FAN60 60mm fan 12V Brushless
1200-FAN54 54mm fan 12V Squirl Cage Brushless
1200-BEZF Front Bezel
1200-BEZH Head Bezel
1200-H Handle
1200-QR Quick release clamps (pair)
1200-PCBLED LED 3in1 4 unit PCB (include 4 LED's)
1200-LED LED 3in1 TX RGB single LED
1200-SENFC Focus Sensor
1200-SENPT Pan Tilt Sensor
1200-SENRO Sensor Gobo Rotate
1200-MOTFO Motor Focus
1200-MOTGO Motor Gobo
1200-MOTRO Gobo Rotate Motor
1200-MOTCO Color Wheel Motor
L-5R Phillips platinum 5R Lamp