LED Moving Head Wash 3610 MJ-1006C User Manual ver2.0
www.mjledlighting.com
8
2.
Y Reverse
Settings, Choose menu by pressing ”UP&DWON” button, will show YES/NO,.
correcting by “ENTER” Button..
3.
XY Exchange
Settings, Choose menu by pressing ”UP&DWON” button, will show YES/NO,.
correcting by “ENTER” Button..
Display
Press “Menu” , and choose Display by “UP&DOWN”
，
it will be show
Language
,
Lighteness
,
Poorlight
three mode, to confirm by press “ENTER” button.
1. Language
Settings, Choose menu by pressing ”UP&DWON” button, will show Chinese/English,.
correcting by “ENTER” Button.
2.
Lightenes
s Settings, Choose menu by pressing ”UP&DWON” button, will show 1 to 32,.
correcting by “ENTER” Button.
3. XY Exchange
Settings, Choose menu by pressing ”UP&DWON” button, will show
Constant
open
, Dim, Off. correcting by “ENTER” Button.
Man Control
Press “Menu” , and choose Man control by “UP&DOWN”
，
it will be show
CH1 to CH16
, to
confirm by press “ENTER” button.
1.
CH1 . Press the ENTER then pressing ”UP&DWON” button, will show 001 to 255,.
correcting by “ENTER” Button.
2.
CH2 . Press the ENTER then pressing ”UP&DWON” button, will show 001 to 255,.
correcting by “ENTER” Button.
…………………………
3.
CH18 . Press the ENTER then pressing ”UP&DWON” button, will show 001 to 255,.
correcting by “ENTER” Button.
Test operation
Press “Menu” , and choose Test operation by “UP&DOWN”
，
it will be show
Sound or Auto
mode
, to confirm by press “ENTER” button.
Resume default
1.
Press “Menu” and choose Resume default by “UP&DOWN”
，
confirm by press “ENTER” button,
it shows factory settings
Fixture rese
Press “Menu” and choose Fixture rese by “UP&DOWN”
，
confirm by press “ENTER” button, it
shows reset.
Maintenance:
To prolong the life of the projector, some maintenance work has to be done to ensure the LED
optical system in good condition. If the projector does not function, check the fuses on the power
socket of the projector, they should only be replaced by fuses of the same specification. Should
these be damaged, call a qualified technician before replacement. The projector has thermal
protection device that will switch off the projector in case of overheating. Should either of these
operate, check that the fans are not blocked, and if they are dirty, clean them before switching on the
projector again. Check that the fans are operational, if not, call a qualified technician.
☆
Any maintenance work should only be carried out by qualified technicians.
