8
MAINTENANCE
Turn the power switch “OFF” and unplug the power cord from its power source prior to any mainte-
nance.
CLEANING
With the Utility Sharpener unplugged, rotate the abrasive wheel slowly and inspect for any damage.
CAUTION: REPLACE
the abrasive wheel if there is any damage at all.
FAILURE
to replace a damaged wheel
can cause serious injury to the operator.
CAUTION: DO NOT USE FLAMMABLE MATERIALS
to clean the Utility Sharpener. A clean dry rag or brush
is all that is needed to remove dust and debris build-up.
Repairs to the Utility Sharpener should be performed by trained personnel only. Contact your retailer for
authorized service. Unauthorized repairs or replacement with non-factory parts could cause serious injury
to the operator and damage to the Utility Sharpener.
TO PREVENT INJURY TO YOURSELF or damage to the Utility Sharpener, turn the switch to “OFF” position
and unplug the power cord from the electrical receptacle before making any adjustments.
TROUBLESHOOTING GUIDE
WARNING
PROBLEM
LIKELY CAUSE
SOLUTION
Motor does not run
Machine not plugged in
Power switch in “OFF” position
Power cord is faulty
Fuse or circuit breaker are open
Damaged motor
Plug power cord into electrical receptacle
Push switch to Forward or Reverse
Return to retailer
Overloaded electrical circuit
Return to retailer
Motor does not have
full power
Incorrect line voltage
Damaged motor
Have a qualified electrician check line for proper voltage
Return to retailer
Motor runs hot
Motor is overloaded
Poor air circulation around motor
Reduce pressure on workpiece
Remove any blockage around openings in the base
Motor stalls or runs
slow
Motor is overloaded
Incorrect line voltage
Capacitor has failed
Reduce pressure on workpiece
Have a qualified electrician check line for proper voltage
Return to retailer
Fuse blows or circuit
breaker trips
Motor overloaded
Overloaded electrical circuit
Wrong fuse or circuit breaker
Undersized or excessive length of extension cord,
see manual
Grinding wheel is blocked
Reduce pressure on workpiece
Reduce the amount of items on circuit
Replace with correct fuse or circuit breaker
Use correct size
Unplug machine and remove obstruction
