CONNECTING TO PAIRED DEVICES
*** The Venture must have been previously paired
with your device before you can connect ***
When the Venture is turned on and not in pairing mode, it should
automatically connect to last connected device. If the last connected device
is not available, the Venture will connect to other paired devices in the order
of last connection.
If the Venture does not connect and remains in standby mode, a short press
of the Play/Pause button will connect to the last connected device with
Bluetooth on and within range.
Notes: On some PC and Mac computers you will need to manually enable
Bluetooth audio every time you connect
USING THE VENTURE HEADPHONES
Adjusting Volume
Status
No media
playing
Media
playing
During a
phone call
Action
N/A
Increase
volume
Decrease
volume
Increase
volume
Decrease
volume
Operation
The Venture volume
cannot be adjusted
when media is not
playing
Single press or press
and hold the Volume
Up button
Single press or press
and hold the Volume
Down button
Single press Volume
Up button
Single press Volume
Down button
Notes
N/A
Volume will adjust on the Venture;
the connected device volume is
independent. If the volume is not
loud enough or too loud, adjust the
volume on your device and the
Venture. When connected to some
computers the volume will be
controlled only on the Venture.
Volume adjustments change the
volume on the device, not the
Venture.
Note: When the volume reaches the minimum or maximum level there will be
two short tones.
4
EN
