Meech 914EX, Operating Manual

Page: 13 / 20

Fault Finding
Tests must be completed by a qualified electrical engineer.
If in doubt please contact Meech head office or your local distributor.
CAUTION: Whilst no danger to personnel exists, it is essential that, with the exception
of bars with a water resistant option, high voltage ionising equipment, makes no
contact with water or water based fluids. Should such an event occur, disconnect
immediately and return equipment to the manufacturer for water damage assessment.
The Model 914EX ionising bar forms part of a system, comprising the bar itself and a
Model 905 Power Unit. (See Fig 2)
To verify where a fault may have occurred it is important to test each item of the
system individually. Should more than one bar be connected to a power unit, these
must be tested individually.
To check the Model 914EX bar follow the procedure detailed below.
1. Switch off the electrical supply to the system and disconnect the IEC plug.
11