71
GB
1. Pull the bevel adjustment lever
(8)
to unlock the base plate
(11)
(Fig. 5, step 1).
2. Move the base plate
(11)
forward to disengage it (Fig. 5, step 2).
3. Tilt the base plate
(11)
to adjust required cutting angle (Fig. 5, step 3).
4. Move the base plate
(11)
backward to re-engage it (Fig. 5, step 4). Ensure the pin is
engaged into the teeth.
5. Push the bevel adjustment lever
(8)
to lock the base plate
(11)
(Fig. 5, step 5).
WARNING! Always ensure to adjust a position in a pre-defined
angle! Do not attempt to adjust any other position to avoid sudden
tilting during operation and thereof resulting injuries and damage to
property!
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
cm
11
8
Fig. 5
A
S
D
F
G
Pendulum adjustment
WARNING!
Only change the settings when the product is switched off and has
come to a complete stop! Always ensure that pendulum selector is
adjusted to the correct position depending on the intended operation!
Do not use the product with a pendulum selector in any other position!
Summary of Contents for 023-024
Page 78: ......