EN
49
Adjusting the angle of the trimmer head
The angle of the trimmer head can be set
between 0° and 90°C. The 90° angle is
intended for edge trimming.
1.
To change the angle, first push up the
control to adjust the trimming angle
(see diagram).
2.
Keep the control pressed in while
turning the trimmer head.
3.
Release the control when the trimmer
head is in the required position.
4.
Make sure the control goes back to the
original position so that the trimmer
head locks.
Using the lawn trimmer to trim edges
1.
Set the trimmer head to an angle of 90°.
2.
Make sure that both wheels (see arrows)
rest on the ground during the work.
MAINTENANCE
NOTE:
Remove the battery before cleaning.
• Clean the machine with a cloth moistened with a mild detergent.
• Do not immerse the product in water or any other liquid, and do not splash with water or any
other liquid.
• Never allow liquid to penetrate into the machine.
• Do not use a high-pressure jet.
Storage
• Remove the battery from the machine after use.
• Store the machine out of the reach of children when not in use.
• Only use parts and accessories recommended by the manufacturer.
