ENGLISH
22
Never modify the tool in any way. The manufacturer cannot be held responsible for any personal
injury or damage to equipment incurred as a result of such modifications.
Even if the tool is used in accordance with the instructions it is impossible to rule out all risk factors.
The following are potential risks that may be incurred as a result of the type and design of the tool.
-
Damage to lungs (if effective dust mask is not worn).
-
Damage to ears (if effective ear protection is not worn).
WARNING
:
Vibration levels can deviate from the declared value during the actual use of the tool, depending on
how the tool is used.
The following measures will reduce the risk of injury as a result of vibrations.
-
Wear gloves.
-
Do not work for excessive periods of time, and do not keep the switch pressed for long
consecutive periods.
TECHNICAL DATA
Rated voltage
230 V ~ 50 Hz
Output power
300 W
Speed (no load)
0-850 rpm
Chuck
10 mm
Sound power level,LwA
77 dB(A), K=3 dB
Sound pressure level,LpA
66 dB(A), K=3 dB
Vibration level
2,7 m/s², K=1,5 m/s²
Always wear ear protection!
The declared vibration value, which has been measured by a standardised test method, can be used to
compare different tools with each other and for a preliminary assessment of exposure.
WARNING:
The actual vibration level when using power tools may differ from the specified maximum
value, depending on how the tool is used. It is therefore necessary to determine which safety precautions
are required to protect the user, based on an estimate of exposure in actual operating conditions (taking
into account all stages of the work cycle, e.g. the time when the tool is switched off and when it is idling,
in addition to the start-up time).
Summary of Contents for 000-176
Page 25: ......
