ENGLISH
32
STEP 4: Fitting the pin socket or trailer hitch
1.
Fit the pin socket on the drawbar with M8 x 70 screws with round heads, Ø 8 flat washers and M8
nyloc nuts, insert the round pin in the hole in the pin socket and drawbar and lock with the Ø 3 lock
pin.
2.
Fit the 50 mm trailer hitch on the drawbar with M12 x 70 hex screws, Ø 12 flat washers and M12
nyloc nuts.
STEP 5: Fitting the wheel axle
1.
Place the drawbar between the brackets for the wheel axle.
2.
Screw together the upper ends of the brackets for the wheel axle with M10 x 20 hex screws, Ø 10
flat washers and M10 hex nuts. Do not tighten the screws.
3.
Insert the wheel axle through one of the brackets and put on a long bushing. Insert the wheel axle
through the hole in the drawbar, put on the other long bushing, and put the wheel axle through the
other bracket.
Screw with round head M8
x 70
Round pin
Pin socket
Lock pin Ø 3
Drawbar
Flat washer Ø 8
Nyloc nut M8
Flat washer Ø 12
Nyloc nut M12
Hex screw M12 x 70
Trailer hitch
50 mm
Long bushing
Hex screw
M10 x 20
Wheel axle
Flat washer Ø 10
Hex nut M10
Drawbar
