ENGLISH
33
WARNING:
The actual vibration level when using power tools may differ from the specified maximum value,
depending on how the tool is used. It is therefore necessary to determine which safety precautions are
required to protect the user, based on an estimate of exposure in actual operating conditions (taking into
account all stages of the work cycle, e.g. the time when the tool is switched off and when it is idling, in
addition to the start-up time).
DESCRIPTION
Package contents
Description
Qty
Eccentric sander 150 mm
1
Sanding pad with Velcro fastener, 6 holes
1
Dust hose
1
Dust bag
1
Spanner
1
Connector
1
Operating Instructions
1
The sanding pad is already fitted on the tool on delivery.
USE
Preparations
Before assembly and use, check that all the parts in the package contents list are present. If any part is
missing or damaged, do not attempt to assemble, install or use the product. Contact your dealer to obtain
replacement parts.
Compressed air supply
See chart below.
1.
Check that the compressor provides a sufficient air flow.
2.
The tool must always be turned off when it is connected to the compressed air supply.
3.
The normal operating air pressure for the tool is 6.2 bar. High pressure and contaminated air will result
in unnecessary wear to the tool and can also lead to a risk of personal injury or material damage.
4.
Drain off any water from the compressor’s air tank every day when appropriate, and empty the air
hoses of any condensate that has accumulated. Otherwise, water from the air hoses can penetrate
into the tool and damage it.
5.
Clean the filter cartridge in the air inlet every week. The chart below shows the recommended
connection.
6.
If hoses are very long (normally longer than 8 metres), the line pressure must be increased to
compensate for the pressure drop. The minimum inner diameter of the hose is 1/4”. Couplings must
have the same inner diameter. An air hose with an inner diameter of 3/8" is normally recommended for
optimum functionality.
7.
Use appropriate hoses and couplings. We do not recommend connecting quick-release couplings
directly to the tool, as they can cause malfunctioning as a result of vibrations. Connect a hose to the
tool instead and fit a quick-release coupling between the air hose from the compressor and the
vibration damping hose attached to the tool.
8.
Check each hose for wear before use. Make sure that all connections are secure.
Summary of Contents for 071-036
Page 37: ......