29
LED
The tool has a work light to improve visibility in dark areas.
Accessories
To replace accessories, pull off the rubber cap on the front of the tool. Fit the accessory to the nose.
Press the accessory firmly on the tool.
MAINTENANCE
Keep the ventilation openings on the tool clean.
Blow air through the tool housing after use to remove dust. Dust and debris can cause overheating
and damage the tool.
Clean the tool when necessary with a soft, damp cloth. Do not use solvents. Never allow liquid to
penetrate into the tool. Never immerse any part of the tool in liquid.
Jula reserves the right to make changes. In the event of problems, please contact our service
department.
www.jula.com
Summary of Contents for 060-112
Page 30: ......
