EN
12
15. Container
16. Intake connection
FIG. 1
ASSEMBLY
WARNING!
• Do not start the product until it is fully
assembled.
• Do not allow children to play with the
product or the packaging material – risk
of suffocation!
1. Put the filter cartridge (9) in the filter bag
(8).
2. Put the filter cartridge with the filter bag
in place on the motor unit.
3. Press in the extruding parts in the filter
cartridge (8).
FIG. 2
4. Put the motor unit (1) on the container (15).
5. Lock in place with the lock hooks (5).
FIG. 3
FIT THE SUCTION HOSE
1. Connect the suction hose (6) with a hose
clip (7) to the intake (16) on the container.
FIG. 4
2. Fasten the hose coupling on the other
end of the hose with a hose clip (7), hose
connection (10) and adapter if necessary
(11-14).
FIG. 5
USE
STARTING/STOPPING
• To start the product put the power switch
(2) in position I.
• Put the power switch (2) in position O to
switch off the product.
MAINTENANCE
CLEANING
IMPORTANT:
Pull out the plug before cleaning.
• Clean the product after use and check the
filter for damage.
• Wipe any dust off the product with a
cloth.
• Clean the product with a cloth moistened
with water and a mild detergent. Do not
use strong detergents or solvent, they can
damage the plastic parts. Make sure that
no water gets into the product.
STORAGE
• Store the product and all accessories in a
clean, dry and frost-free place, protected
from direct sunlight and out of the reach
of children. The best storage temperature
is 5 to 30°C.
• Store the product if possible in the original
pack.
• Cover the product to protect it from dust
and dirt.
Summary of Contents for 021132
Page 3: ...1 2 3 15 1...
Page 4: ...4 5 7...
