SV
63
wide end of the nozzle firmly on the product.
BILD 4
OBS!
When the small nozzle is not in use it can be put in the base of
the product. On the back of the product casing there is a hole to
hang it up.
Never block the deflation port on top of the product, this can
cause overheating and can damage the product.
Never block the nozzle, this can also cause overheating.
INFLATING
• Fit the required nozzle.
• Insert the nozzle into the air opening on the inflatable item.
• Start the by pressing in and then releasing the power switch.
The product continues to work until it is switched off.
• When the item is inflated, press and release the power
switch to switch off the product.
• Remove the nozzle from the inflated item and close the
inflation valve.
BILD 5
OBS!
The maximum pressure for the product is 0.03 bar.
DEFLATING
• Put the large nozzle in the deflation port on top of the
