EN
21
SYMBOLS
Read the instructions.
Approved in accordance with
the relevant directives.
Recycle discarded product in
accordance with local
regulations.
TECHNICAL DATA
Rated voltage
230 VAC, 50 Hz
Nominal output
60 W
Working temperature range
200 – 450°C
Safety class
I
DESCRIPTION
FIG. 1
1. Control unit
2. Power cord and plug
3. Power switch
4. Cable between control unit and soldering
iron
5. Soldering iron
6. Soldering wire (1 x 1.0 mm, 1 x 1.5
mm)
7. Auxiliary soldering tips (1 pointed, 1 flat)
8. Sponge
9. Pointed soldering tip (attached on delivery)
10. Sponge tray
11. Stand for soldering iron
FIG. 2
12. Button [+] to increase set temperature.
13. Button [–] to reduce set temperature.
14. Preset button for 400°C
15. Preset button for 300°C
16. Preset button for 200°C/standby
17. Temperature display
Electrical safety
• The product must only be connected to a
correctly installed and earthed power
point.
• The product must be connected to the
mains with a residual current device of
max 30 mA.
• Check that the mains voltage corresponds
to the rated voltage on the type plate.
• Do not touch the plug or power cord with
wet hands or other wet parts of your body.
Do not pull the power cord to unplug the
plug.
• Keep the power cord away from heat, oil,
sharp edges and moving parts. Avoid
bending, clenching, dragging or driving
over the power cord.
• Do not carry or pull the product by the
power cord.
• Always check the power cord and plug
before they are used.
• Pull out the plug immediately if the power
cord or plug get damaged. Do not use the
product if the power cord or plug are
damaged.
• Pull out the plug when the product is not
in use.
• Check that the power switch is in the OFF
position before plugging in the plug.
• Switch off the product before pulling out
the plug.
• Switch off the product and pull out the
plug before transporting.
Summary of Contents for 018680
Page 3: ...1 ...
Page 4: ...2 3 4 ...
