Meec tools 017711, Operating Instructions Manual, Page: 47 / 51

EN
47
NOTE:
Use suitable dust extraction for the material
that is to be sawed.
• Connect the extraction hose to the
extraction connections (7) and (8).
Follow the instructions below if the dust
extraction gets blocked by dust, chips or pieces
of the workpiece.
1. Switch off the product and pull out the
plug.
2. Wait until all moving parts have come to a
complete standstill.
3. Determine the reason for the blockage
and rectify it.
USE
INTENDED USE
The saw is intended for rip and cross-cut
sawing of all types of wood of the shape and
dimensions that suit the product.
NOTE:
• The saw is not intended for sawing
round wood of any kind.
• The saw is only intended to be used with
suitable blades (hard metal or chrome/
vanadium steel). Never use high-speed
steel blades or cutting discs. The saw is
not intended for commercial or
industrial use. Commercial, professional
or industrial use (or equivalent) will
invalidate the warranty.
BEFORE USE
Try out the different settings on spare pieces
before starting the work. Carefully read these
instructions before use, and follow all the
instructions and safety instructions to avoid
personal injury and/or material damage.
FITTING THE BLADE GUARD
Page 7, figure 10
1. Fit the blade guard (6) on the splitting
knife as shown in the figure and lock in
place with the carriage screw and wing
nut (22).
2. To remove the blade guard (6), unscrew
the carriage screw and wing nut (22) and
lift off (6).
CHECKING THE BLADE GUARD
After fitting, check that the blade guard (6) is
working properly.
1. Lift the guard (6) and release it.
2. The guard should automatically return to
its original position.
FITTING THE LATERAL FENCE
Page 8, figure 12
• Put the lateral fence (3) in the slot in the
saw table.
FITTING THE PARALLEL FENCE
Page 8, figure 13
NOTE:
The parallel fence (4) can be put on the
guide rail when the clamping lever (31) is
horizontal. Press down the clamping lever
and lock the parallel fence.
• Put the parallel fence (4) on the guide rail
(28) on the front of the saw table.
FITTING THE DUST EXTRACTION
Page 4, figure 2
IMPORTANT:
Risk of health impairment from dust. Always
use dust extraction when working with
material that produces harmful dust.