EN
24
TECHNICAL DATA
Rated voltage
230 V ~ 50 Hz
Nominal input power
250 W
Pump pressure
0.6 bar
Flow
100 l/min
Lifting height
max 6 m
Submersion depth
max 7 m
Particle size
max 5 mm
Water temperature
max 35°C
Ambient temperature
max 40°C
Protection rating
IPX8
Cord length
5 m
Connection
1” G 1” 1-1/4” G1-1/4”
Size
L15,8 x W16,3 x H28,3 cm
Weight
3.7 Kg
Always wear ear protection.
The declared values for vibration and noise, which
have been measured according to a standardised
test method, can be used to compare different
tools with each other and for a preliminary
assessment of exposure. The measurement
values have been determined in accordance
with EN ISO 3744:1995.
WARNING!
The actual vibration and noise level when
using tools may differ from the specified
maximum value, depending on how the
tool is used and the material. It is therefore
necessary to determine which safety
precautions are required to protect the user,
based on an estimate of exposure in actual
operating conditions (taking into account all
stages of the work cycle, e.g. the time when
the tool is switched off and when it is idling,
in addition to the start-up time).
• Protect electrical connections from
moisture.
• Do not expose the product to
temperatures below 0°C. Make sure that
the product is not run without liquid.
• Do not pump aggressive liquids or
abrasive material.
• Do not pull the power cord or float switch
cord to move the product, and do not use
them to secure the product from moving.
• The product is only intended for
household use and is not suitable for
commercial purposes.
• The manufacturer cannot accept liability
for personal injury or material damage
resulting from improper use.
IMPORTANT:
The product must be connected to the mains
with a residual current device of max 30 mA.
SYMBOLS
Read the instructions.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
Summary of Contents for 015269
Page 4: ...2 1 ...
