EN
50
Press the ENTER button to show fault codes. If there are more than
two fault codes, browse with the arrow buttons to select and show the
required fault code.
1.
Reduced performance high speed CAN bus
2.
Status sensor/switch A for throttle/peddle low
FIG. 13
Deletion of fault codes
Mark the item Erase Codes and press ENTER button. The display shows:
FIG. 14
Reading of chassis number (VIN)
Mark the item VIN Codes and press the ENTER button.
1.
Read chassis number
2.
The vehicle does not support this function
3.
Press any button to continue
FIG. 15
System protocol
Mark the item System protocol. The display shows:
FIG. 16
CONTRAST
Mark the item Contrast. The display shows:
1.
System setup
2.
Contrast
3.
Measurement unit
