EN
10
DESCRIPTION
1. Protective cover
2. Measuring tips
3. Moisture quotient
4. Ambient temperature
5. Detection mode
6. Selection of temperature unit and
Max/Min value
7. Mode selector button
8. Power switch (On/Off)/Lock button
9. Light off/on
FIG. 1
USE
Inserting the battery
1. Open the battery cover on the back of the
product.
2. Insert four 1.5 V batteries size AAA with
the correct polarity.
3. Close the flap.
STARTING AND SWITCHING OFF
Press the power switch to start the moisture
meter and press the button for 3 seconds to
switch it off.
SCREEN LIGHTING
Move the power switch on the side of the
product to switch on the lighting.
SELECTION OF TEMPERATURE UNIT
Press the
°C/°F
button to switch between
showing the temperature in °C and °F.
MAX/MIN VALUE
Press the button
°C/°F
for 3 seconds to show
the maximum and minimum measured value.
SAFETY INSTRUCTIONS
• Always take basic safety precautions
including the following when using
battery powered products to reduce the
risk of fire, battery leakage, personal
injury and/or material damage.
• Never attempt to open the battery.
• Do not store the battery where the
temperature can exceed 40°C.
• Recycle used batteries in accordance with
local regulations.
• Do not burn batteries.
• Extreme conditions can result in battery
leakage. Wipe off any fluid leaking from a
battery with a cloth, and avoid skin contact.
SYMBOLS
Read the instructions.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Battery
4 x 1.5 V AAA (LR03)
Screen (backlit)
LCD
Power consumption, operation
10 mA
Temperature range
0 to 40
˚
C
Resolution 0.1%
Precision, conductivity measuring
±2%
Ambient temperature*
0 to 40
˚
C
Ambient temperature**
-10 to 50
˚
C
Humidity
max 80% RH
Automatic power-off***
Yes
Protection rating
IP20
* Operation, ** Transport and storage
*** After 2 minutes of inactivity
Summary of Contents for 010988
Page 3: ...1 1 2 3 4 7 8 6 9 5 2...
Page 12: ......