CONNECTING TO PAIRED DEVICES
Once the Wave is turned on, it will automatically connect with the last paired
Bluetooth device that is on and within range. If the Wave is not connected
automatically, tap the
Multifunction
button once to initiate connection with last
paired device. If the headset still does not connect, open the Bluetooth menu
on your device and select “Air-Fi Wave” from the Bluetooth device list.
Note: On some computers, the Bluetooth connection must be established
manually every time.
CONTROLS
The Wave can control media and phone calls from a smartphone or tablet.
Adjusting Volume
Function
Operation
Notes
Increase volume
Short press the
Volume up
( ) button
Headset will produce
a tone when volume
reaches the minimum
or maximum level.
Decrease volume
Short press the
Volume down
( ) button
Note: volume adjustments made while playing media will change the volume of the
headset independently of the connected device. Raise or lower device volume as
needed to further increase or decrease the overall volume. Some newer devices use
AVRCP 1.4 Bluetooth Profile, which will allow the Wave to control the device volume
directly at all times.
Controlling Phone Calls
Status
Function
Operation
Incoming call
Answer call
Press the
Multifunction
button
Reject call
Press and hold the
Multifunction
button for 2 seconds
Call in progress
End call
Press the
Multifunction
button
Transfer call to headset Press and hold the
Multifunction
button for 2 seconds
continue to next page
5