Health status
Diastolic value
Date
Time
Voice status
Unit:mmHg or Kpa
User choice
Measurement
times
Systolic value
Pulse icon
Low battery
indicator
⑦
⑤
⑥
④
①
③
②
Product function: Measure and display systolic and diastolic blood pressure and pulse rate. It
can store 2x90 sets memory (2 users, 90 sets memory for each user).
Intended use: It is intended to measure adult’s systolic and diastolic blood pressure and pulse
rate on upper arm.
Applicable upper arm circumference: 22cm~32cm.
2.Intended Use & Product Feature
Figure 1 Device configuration and LCD full display
Cuff connector
Cuff
Air hose
2
⑨
⑧
① ON/OFF button ② MEMORY button
③ SET button ④ USER button
⑤ DOWN button ⑥ UART port
⑦ LCD display ⑧ Cuff socket
⑨ Battery compartment cover
3.1 Install or Replace Batteries
Open battery compartment cover
⑨
and insert batteries to ensure the polarity (<+>
and <->) of the batteries are correct and then close it. If the low battery icon
displayed please replace the batteries immediately. (See Figure 2)
●
Use 4pcs AA alkaline battery.
●
Do not mix different types of batteries, or an old battery with a new one.
●
Remove the batteries if the device is not going to be used for long time.
●
Reset the time and date after replacing the batteries.
Figure 2
4XAA alkaline battery
Battery compartment cover
3
3.Preparation before Use
