manualshive.com logo in svg

Medtronic PROTECTA XT DR D314DRG, Clinician Manual

Share
Download
Medtronic PROTECTA XT DR D314DRG Clinician Manual Download Page 99

a. The SessionSync – Saving Session Data on Programmer window opens.
b. The window shows the progress of session data being saved automatically on the

programmer’s hard disk.

The programmer side of the SessionSync status icon turns blue after the data has

been saved on the programmer’s hard disk.

If the subsequent transfer is successful, the data management system side of the

SessionSync status icon turns blue.

See Section 4.14.4.2, “States of the SessionSync status icon”, page 100 for more

details.

Note: If error messages appear during the data transfer process, see Section 4.14.5,

“SessionSync error messages”, page 101 for a list of message descriptions.

4.14.3.3  Transferred data

The following table lists the device data that is transferred with Automatic SessionSync or

Manual SessionSync to the Medtronic Paceart data management system.

Table 6. Data transferred with SessionSync

Feature name

Information exported

Therapy Parameters

Initial interrogated values

Last programmed values

Patient Information

Last programmed values

Battery and Lead Measurements

Last measured values

Threshold Tests

a

Last results for each test type conducted (for each chamber

tested)

Sensing Tests

a

Last results for each test type conducted (for each chamber

tested)

Automatic Diagnostics

Event Counters

Atrial High Rate Episodes

Ventricular High Rate Episodes

Mode Switch Episodes

Rate Drop Response Episodes

Device Memory

Retrieved from interrogation performed only for saving session

data

a

Manual test results are saved only if the user has saved the results.

4.14.4  Viewing the SessionSync data transfer status

The programmer indicates the status of the SessionSync feature through the SessionSync

status icon in the task bar and through the SessionSync Status screen.

Medtronic

PROTECTA™ XT DR D314DRG

Clinician Manual

99

Summary of Contents for PROTECTA XT DR D314DRG





























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands