4) Put on the electrostatic bracelet and then plug the other end into the connector.
When the bracelet is properly connected and functioning, the electrostatic mode is then enabled
automatically. A red indicator light will be lit on the left side of the sprayer when pulling the trigger.
5) Press trigger to begin disinfecting.
NOTE: If the electrostatic bracelet is not connected and engaged, the sprayer will still
function but the discharge will not have an electrostatic charge.
6) After use: Clean the sprayer thoroughly after each use. To clean the sprayer, use soap, water and a
damp cloth to wipe clean. Disconnect the battery from the sprayer for storage to reduce the risk of
accidental spraying.
