(pre-installed reminders) Use the remote control arrow buttons to highlight the top file
selection title: IMAGE. Press enter on the remote control. A list of files will appear
arranged in category groups, Appointments, Diabetes, Drink, Food, Home, Medication,
and Safety. Scroll down the list using the down arrow button until you see the reminder
type required. Press enter on the remote control to select the file. The screen will return
to the previous menu where your file selection will be shown next to Image, Audio, or
Video, depending on the file type selected. Use the remote control down arrow button
to move to audio file selection.
AUDIO
– (pre-installed reminders) Repeat the instruction for IMAGE above after
selecting AUDIO.
VIDEO
-
(pre-installed reminders) Repeat the instruction for IMAGE above after
selecting VIDEO.
NOTE: You cannot select AUDIO + IMAGE + VIDEO for a reminder. It can be
VIDEO only or AUDIO + IMAGE.
WHEN ALL ALARM SETTINGS ARE COMPLETE HIGHLIGHT SAVE AT THE
BOTTOM OF THE SCREEN THEN PRESS ENTER TO SAVE THE ALARM.
PRESS EXIT BUTTON TO RETURN TO ALARMS SCREEN
When you press save the display will go back to the alarm setting screen where your
set alarms will be highlighted in green. To check the settings for any set alarm,
highlight the alarm using the remote DOWN/UP arrows. As you highlight an alarm, the
settings, including selected files will be shown below the alarm buttons. Press the
remote control exit button to return to time display screen.
CLEARING ALL YOUR SET ALARMS
If you wish to clear all previously set alarms, go to the alarms screen. Use the remote
control arrow buttons to highlight CLEAR ALL ALARMS. Press enter. When you see
the message “This will clear all alarms ARE YOU SURE????” Highlight NO or YES
then press enter. If you do not want to clear all alarms press EXIT button.
CHANGING PREVIOUSLY SET ALARMS
To change the time or frequency of an alarm, highlight the alarm box then press
enter. Change the time and alarm type. To replace an alarm file you must use the
REMOVE button (it will appear next to selected files). Highlight it, press enter, then
click save at the bottom of the screen. You can now select new reminder files.
How to setup video available at www.memrabel.co.uk
Alternatively scan the QR code below for a direct link to the instructional video:
MemRabel 2 User Manual REV 07/17
MedPage Ltd
01536 264849
