The Active Daily Reminder Clock
CHOICE OF TIME DISPLAY FORMATS
CHOICE OF TIME SCREEN COLOUR
20 PROGRAMMABLE ALARMS
CREATE REMINDERS WITH PHOTOS, AUDIO OR VIDEO
PRE-INSTALLED READY-TO-USE REMINDER FILES
IN THE BOX
This manual, 1 x MemRabel 2 Screen, 1 x A/C Power
adaptor, 1 x Remote Control, 1 x Stand Attachment.
First insert the stand attachment into the stand socket
and tighten. Next insert the A/C power supply jack plug
into the socket marked DC. Plug the power adaptor into
a convenient mains power socket. MemRabel 2 will
perform a start-up sequence and after a few seconds
will revert to the default time display screen. You can
change it later if you wish.
MemRabel 2 must be connected to a mains power supply at all times. In the event
of a power failure or accidental removal of the power adaptor from the mains, when
power is reconnected the correct time and alarm settings will be restored
automatically. During a power down, MemRabel 2 alarms are inactive.
Locate the remote control. Gently pull out
the plastic battery isolator tab to activate
the remote control. Note: The remote
control is solely for the purpose of setting
the time and alarm time reminders. When
all settings are complete please store the
remote control in a safe place to prevent
tampering or accidental switching off of
the MemRabel 2.
NO FUNCTION
MOUSE MODE
DO NOT USE
MENU BUTTON
MENU NAVIGATION
BUTTONS
EXIT BUTTON
VOLUME UP
VOLUME DOWN
MemRabel 2 User Manual REV 07/17
MedPage Ltd
01536 264849
