44
5. Disassembly Of Major Components
TOOLS:
Metric Socket and Wrench Set (10mm, 13mm,
19mm, and 24mm)
Marker (Sharpie)
Once the SolarBee is on shore, it is ready
for disassembly to make it ready to store or
transport.
STEP 1: Disconnect the three depth indicator
chains from the chain brackets and remove the
hose from below the dish.
STEP 2: Remove the intake plate from the
hose.
STEP 3: Once the hose is removed, turn in the
turnbuckles until the core unit rests on the
ground and the float arms and turnbuckles are
not in compression or tension.
STEP 4: Remove the turnbuckles from the core
unit.
STEP 5: Remove the floats from the float arms.
STEP 6: Using a marker, place an indicator
mark next to the hole that is used to bolt the
float arm to the lower part of the core unit. This
will aid when reinstalling the machine.
STEP 7: Remove the float arms from the
machine.
SolarBee Removal