MDS86960KDMB, MDS86960KDMBG (PIC-00303)
Revision: 05/08/18
Flip the One Panel (B) and the Two Panel (A) Sections of the transfer bench upside down so the aluminum frame is visible.
Insert the One Panel Section into the Two Panel Section (tubular hole). Ensure the push buttons are inserted all the way and
are engaged properly. The entire unit will now be referred to as the Three Panel Seat.
Note the four posts at each corner of the Three Panel
Seat. Each post features a hole facing outward.
Three Panel Seat
Assembly Instructions
B
A
Insert one Leg Extension (C) into the post of the Three
Panel Seat. Please ensure the hole in the Leg Extension (C)
matches up with the hole in the post of the Three Panel
Seat. Repeat for the remaining three posts.
Please note: the Leg Extensions (C) should be on the side
of the larger side of the three panel seat. The Suction Cup
Leg Extension (D) should be on the side where there is an
extra cross bar for the backrest and side arm are attached.
Insert a Clamp (E) into the hole to secure the leg into place.
Repeat for the remaining three legs.
Three Panel Seat
C
C
E
4
