15
QUICK REFERENCE
(HOW TO SET FEEDING STRENGTH, PROGRAMMABLE
FLUSH, OR RESET WATER VOLUME DELIVERED)
PROGRAMMABLE FLUSH
AFTER DOSE IS DELIVERED
A set volume of water for hydra-
tion or flushing that is automatically
administered after the dose limit is
delivered at a rate of 375 mL/hr.
1. Press
SELECT
until Set Volume is
displayed.
2. Press or . The Water Volume
is adjustable in 1 mL increments
from 0–500. Change is more
rapid when the key is pressed
and held.
3. Press
SELECT
until Time Interval
is displayed.
4. Press until
doSE
is displayed.
TO DEACTIVATE HYDRATION
AND PROGRAMMABLE FLUSH
(WATER SIDE SETTINGS)
1. At Time Interval, press until
nOnE
is displayed.
2. Reset Feeding Volume Delivered and
Accumulated Volume. Set Rate and
Dose Limit. Verify feeding strength.
FEEDING STRENGTH
(DILUTION)
1. Press
SELECT
until Feeding
Strength is displayed.
2. Enter the feeding strength
required by pressing or .
3. Options are
FS
(Full Strength-No
feeding dilution),
3/4
,
2/3
,
1/2
,
1/3
,
1/4
strength, or
H20
(no
feeding delivery, only water is
delivered).
TO RESET VOLUME
DELIVERED AND/OR
ACCUMULATED VOLUME
Water Volume Delivered is used
to monitor water delivered when
Hydration with Automatic Flush, or
Programmable Flush options are
activated.
1. Press
SELECT
until Volume
Delivered is displayed.
2. Press
RESET
.
3. Follow steps 1 and 2, using
the
SELECT
key to move to
Accumulated Volume, and reset
if desired.
Any time water volume delivered is
reset to 0, feeding volume delivered
is automatically reset to 0. Likewise,
when feeding volume delivered is
reset to 0, water volume delivered is
automatically reset to 0.
Water Accumulated Volume is used
to monitor the total water volume
delivered over multiple time inter-
vals.
Summary of Contents for EntraFloH2O
Page 1: ...ENT199255 Operating Instructions Guide d utilisation Instrucciones de operación ...
Page 3: ......
Page 67: ......