![background image](http://html1.mh-extra.com/html/medline/aeromist-trek-hcs2go/aeromist-trek-hcs2go_instruction-manual_1762666005.webp)
4
wrong or unreasonable use, or if the device has been used on
electrical installations not conforming to the current standards.
The unit should not be used where flammable gas, oxygen or
aerosol spray products are being used.
PREPARING TO USE THE
NEBULIZER COMPRESSOR
1. Charge the battery pack for 24 hours prior to first time use.
2. Before each use, the user should wash his/her hands thoroughly.
3.
Important
- Prior to initial operation, the nebulizer should be
thoroughly cleaned. See “Cleaning and Disinfecting the Device”
instructions in this manual.
1. Turn the power switch off and unplug the adaptor from the
electric outlet.
2. Do not immerse the unit in water or any liquid as this may
damage the unit.
3. Remove the air tube from both the air inlet and from the
jet nebulizer.
4. Disconnect and disassemble the jet nebulizer, mouthpiece
and/or mask.
5.
TO CLEAN:
“AFTER EACH USE” - Wash nebulizer, mouthpiece and
mask in warm water with a mild dish washing detergent.
6.
TO DISINFECT:
“AFTER THE LAST USE OF THE DAY”
A.
Mix one part of white distilled vinegar with three parts hot water
in a clean container.
B.
Submerge mouthpiece, nebulizer, and mask for thirty minutes.
7. Rinse the pieces thoroughly with water to remove the cleaning
solution and let them air dry.
8. When completely dry, reassemble the nebulizer and put the parts
in a clean, dry, sealed container away from dust.
9. There is no need to clean the tubing. If necessary, wipe the
surface
regularly. Replace the tubing when it becomes cloudy
or retains moisture.
CLEANING/DISINFECTING CRITICAL PARTS