27
2. Programming the ON/OFF Time
-
Using the programs P1, P2, P3 and/or P24h in the main menu to set the intervals of ON/OFF timing for the
device. Refer to the section of Changing the operation time on page 15.
3. Ozone Sensor Cut-Off
- Using the ozone sensor and the program O3 Threshold to cut-off the generation of Active Oxygen at a level which is set by
the user. Default cut-off level is at 0.05 parts per million (ppm). When the Active Oxygen levels reach the value limit, the
ozone sensor will stop the device from operating. The device resumes operation once its levels drop down below the value
limit.
1. The PRO AS1000D will be placed on the floor on its leveling feet. It is not recommended to mount the device on the wall due
to its size and weight.
Installation of Device