18.
Getting Started:
Controlling the ozone level into the water
The Medklinn O3 Jetspray Hydro 10 / 20 ozone level is controlled by turning the knob of the O2 Control to increase or decrease
the level ozone generation. It is advisable to keep the flow rate between 1 - 1.5 lpm.
Getting Started:
Turn on the device
1. Plug the power inlet to the AC power outlet.
2. Connect both hoses provided to the device (Refer to Connecting the hose section).
3. Turn on the water supply.
4. Turn on the power button.
5. Make sure that the flow rate of the O2 Control is between 1- 1.5 lpm.
Before: O2 Control
when device is at rest
After: O2 Control when device
is in operation
Knob
Turn
Ball Bearing
Ball Bearing is floating
