MedKlinn Home Asens+ 20 Operating Manual Download Page 3

Congratulations on your purchase of the 

Medklinn Asens

+

 Air+Surface Sterilizer

! It incorporates the most innovative and latest 

air+surface cleaning technology, the Cerafusion

TM

 Technology. Please read the following instructions carefully before using the unit. 

With a little care, it will provide you with many years of clean, fresh and healthy living spaces.

1.  Do not use the unit if the power cable or plug is damaged.

2.  Do not insert any sharp or pointed object through the ventilation holes of the unit.

3.  Do not let children play with the unit.

4.  Do not immerse the unit in water, or allow water or any fluids to enter through the ventilation holes.

5.  When removing the power plug, always hold the plug and never pull the cable.

6.  Do not remove the power plug when your hands are wet.

7.  Remove the power plug from the wall socket before cleaning the unit.

8.  Do not modify, disassemble or repair this unit by yourself.

9.  Do not replace the electric plug or cut the power cable. Replacing the plug or cutting the power cable in any way will 

  immediately cause the Warranty to become void. Any subsequent fault in the operation of the unit will not be covered 

  by the Warranty, and repair and servicing will be chargeable. 

10. If the power cable is damaged, it must be sent to Medklinn Service Centre for repair. 

11. Do not attempt to open the unit. The unit requires minimal maintenance, and no servicing or repairs are to be carried out 

  by the User. Opening the device or tampering with it in any way will cause the Warranty to become void. If you 

  encounter any problems with the unit, please read the Troubleshooting Guide first, and if the problem persists, please 

  contact Medklinn Service Centre.

12. Do not wipe the unit with benzene or paint thinner.

WARNINGS - TO REDUCE THE RISK OF ELECTRICAL SHOCK, FIRE OR INJURY:

READ AND SAVE THESE INSTRUCTIONS. 

FOR FURTHER ASSISTANCE, PLEASE CALL OUR CUSTOMER SERVICE. 

1

Summary of Contents for Home Asens+ 20

















Reviews: