15
ES
DE
EN
PT
Activating alarm type
Radio or connected device
The sound system must be in standby mode.
If you want to be woken by the radio or a connected device, test in
advance if the volume is loud enough.
Buzzer (“
BUZZER
”)
The sound system can be switched on or in standby mode. If it is switched off
when the alarm goes off, first the display lights up and then the alarm sounds.
The buzzer starts quietly and slowly gets louder. It sounds for 1 minute.
Switch off buzzer
You can switch the buzzer off like this:
SNOOZE
: The alarm goes off for the set number of minutes and then sounds
again. You can repeat this up to 10 times.
You also activate the SNOOZE function like this:
– If
ALARM1
sounds, press the
ALARM2
button on the device;
– If
ALARM2
sounds, press the
ALARM1
button on the device.
Switch alarm off completely:
If
ALARM1
sounds, press the
ALARM1
button on the device;
– If
ALARM2
sounds, press the
ALARM2
button on the device.
The buzzer goes off.
Checking time settings
In standby mode press
TIME/SLEEP
repeatedly briefly to display the settings
for the time and
ALARM1
or
ALARM2
in succession.
The order of the displays is the same as when setting them (refer to Page 12).
Automatic switch-off (“SLEEP”)
When the device is on, hold down the
TIME/SLEEP
button for a few seconds.
OFF
is shown on the screen.
Press
TIME/SLEEP
repeatedly to set the switch-off time in 10 minute intervals:
00 minutes > 10 minutes > 20 minutes, etc. up to 90 minutes.
When the SLEEP timer is activated “
SLEEP
” is shown on the screen.
