ENGLISH
16
5.
Everyday operator control
5.1
Switching on / off
TO SWITCH ON
.
To switch on the display put the mains switch in position ”I”.
The standby LED on the infrared sensor lights up red.
.
Now press one of the numeric buttons or [TV] / [VIDEO] / [PC] on the remote control to set the display into
operation.
The OPERATING LED on the infrared sensor lights up blue.
The display must be ”run up”. This is comparable to a PC and takes several seconds.
TO SWITCH OFF
.
Press the stand-by button on the remote control. The display switches back to stand-by mode.
The standby LED on the infrared sensor lights up red.
.
To switch off the display again completely, put the mains switch in position ”0”.
Standby button
If no signal is pending on screen, it is switched automatically to stand-by mode.
.
To switch on again press one of the numeric buttons on the remote control
CHANGEOVER
When you change over from one TV channel to another, first of all you see a still picture of the 1stchannel and then the
moving picture of the other channel.
5.2
Setting the volume
SETTING THE VOLUME
.
Press the button [
A
Vol - ] or [
"
Vol + ] on the remote control to set the desired volume.
Volume:
The current volume setting appears on screen.
.
Select the menu option <SOUND
'
VOLUME>.
Here you can set the current volume or the display’s current switch-on volume.
Volume:
Balance:
Equalizer:
Rock
Option:
Stereo
Volume audio output:
Max.switch--on volume:
Volume control:
ON
User EQ settings
>
Display of the currently set volume
Presetting for the volume when the
display is switched on
Inputs / PIP
>
Picture
>
Display
>
Sound
>
Setting
>
Info
>
←
