background image

English

   - 3 -

Safety Precautions

Read the following recommended safety 
precautions carefully for your safety.

Power Source

The TV set should be operated only from a 220-240 
V AC, 50 Hz outlet. Ensure that you select the correct 
voltage setting for your convenience.

Power Cord

Do not place the set, a piece of furniture, etc. on the 
power cord (mains lead) or pinch the cord. Handle the 
power cord by the plug. Do not unplug the appliance by 
pulling from the power cord and never touch the power 
cord with wet hands as this could cause a short circuit or 
electric shock. Never make a knot in the cord or tie it with 
other cords. The power cords should be placed in such a 
way that they are not likely to be stepped on. A damaged 
power cord can cause fi re or give you an electric shock. 
When it is damaged and needs to be replaced, it should 
be done by qualifi ed personnel.

Moisture and Water

Do not use this device in a humid and 
damp place (avoid the bathroom, the 
sink in the kitchen, and near the washing 
machine). Do not expose this device to 
rain or water, as this may be dangerous 
and do not place objects filled with 
liquids, such as fl ower vases, on top. 
Avoid from dripping or splashing.

If any solid object or liquid falls into the cabinet, unplug 
the TV and have it checked by qualifi ed  personnel 
before operating it any further. 

Cleaning

Before cleaning, unplug the TV set 
from the wall outlet. Do not use liquid 
or aerosol cleaners. Use soft and dry 
cloth. 

Ventilation

The slots and openings on the TV set are intended for 
ventilation and to ensure reliable operation. To prevent 
overheating, these openings must not be blocked or 
covered in anyway.

Heat and Flames

The set should not be placed near to 
open fl ames and sources of intense heat 
such as an electric heater. Ensure that 
no open fl ame sources, such as lighted 
candles, are placed on top of the TV. Batteries should 
not be exposed to excessive heat such as sunshine, 
fi re or the like.

Lightning

In case of storm and lightning or when 
going on holiday, disconnect the power 
cord from the wall outlet. 

Replacement Parts

When replacement parts are required, make sure that 
the service technician has used replacement parts, 
which are specifi ed by the manufacturer or have the 
same specifi cations as the original one. Unauthorized 
substitutions may result in fi re, electrical shock or 
other hazards.  

Servicing

Please refer all servicing to qualifi ed 
personnel. Do not remove the cover 
yourself as this may result in an electric 
shock.

Waste Disposal

Instructions for waste disposal:

• 

Packaging and packaging aids are recyclable and 
should principally be recycled. Packaging materials, 
such as foil bag, must be kept away from children. 
Batteries, including those which are heavy metal-free, 
should not be disposed of with household waste. 
Please dispose of used battery in an environment 
friendly manner. Find out about the legal regulations 
which apply in your area.

• Don’t try to recharge batteries. Danger of explosion. 
Replace batteries only with the same or equivalent 
type.

This symbol on the product or on its packaging means 
that your electrical and electronic device should be 
disposed at the end of its service life 
separately from your household wastes. 
There are separate collection systems for 
recycling in EU. For more information, please 
contact the local authority or the dealer where 
you purchased the product.

Disconnecting the Device

The mains plug is used to disconnect TV set from 
the mains and therefore it must remain readily 
operable.

Headphone Volume

Excessive sound pressure from earphones 
and headphones can cause hearing loss.

Installation

To prevent injury, this device must be securely 
attached to the wall in accordance with the installation 
instructions when mounted to the wall (if the option 
is available).

B02_MB61_[GB]_5110UK_IDTV_GOLD12_37884W_10070326_50179516.indd   3

B02_MB61_[GB]_5110UK_IDTV_GOLD12_37884W_10070326_50179516.indd   3

27.10.2010   14:22:12

27.10.2010   14:22:12

Summary of Contents for P16021
































Reviews: